Clarisea Gen 2 SK5000 auto

Clarisea Gen 2 SK5000 auto
  • Clarisea Gen 2 SK5000 auto
  • Clarisea Gen 2 SK5000 auto
  • Clarisea Gen 2 SK5000 auto
  • Clarisea Gen 2 SK5000 auto

Clarisea Gen 2 SK5000 auto

Artikel nr : Clarisea_Gen_2_SK3000_automatic
Varumärke : ClariSea
3,395 SEK
Inkl 25% moms.
157 SEK/mnd


ClariSea SK-5000 Introduktionspris!

ClariSea fleece-filtret är ett effektivt filtreringssystem med hög effektivitet som avlägsnar suspenderade partiklar som mikroalger, detritus, mat, organiskt avfall och grusdamm från vattenkolomnen. Lämplig för användning i marina akvarier, sötvattenakvarier, fiskodlingssystem och förökningssystem för koraller.



  • High volume filtration capacity
  • Minimal installation footprint
  • Completely replaces the need for filter socks 
  • Self-assembly for easy cleaning
  • Multiple installation options 
  • Automatic advance of dirty fleece 
  • Multi-function smart controller
  • End of roll audible alarm
  • Filter jam/float error/water depth alarm
  • Phosphate free fleece material
  • Special low-odour fleece material
  • Integrated fail-safe overflow 
  • Silencer plates for quiet operation
  • Water bypass system


  • flow rate: up to 5,000 l/h (1320 US gph)
  • Particle size removal: down to 20 microns 
  • Maximum submerged water depth: 20cm (8”)
  • Hang-on bracket height adjustment: up to 12cm (4”) 
  • Maximum sump glass thickness for hang on bracket: 13mm (1/2")
  • Recommended aquarium size at 5 x tank turn over (5000l/hr) = 1000lt
  • Recommended aquarium size at 4 x tank turn over (5000l/hr) = 1250lt
  • Inlet connection: 32mm 
  • Filter fleece: 15cm (6”) width – length 25m (82ft)

Mounting & Installation Options

The Gen2 ClariSea is very flexible and easy to position within your sump: 

  • You can hang it on the back, front or sides of the most sumps.
  • You can freestand it on the base of a shallow sump with a water level below 200mm.
  • you can freestand it on a box or shelf in deeper sumps.
  • You can feed it from the front or from the back.
  • You can feed water from the top, side or at an angle.
  • You can even pump feed it.


Smart Controller Functions

Buttons & Indicators
Motor button
• Manually advances fleece motor
Alarm button
Press alarm button for 1 - 2 seconds will turn off audible alarm, but alarm condition will still be present
  • Red LED still flashing
  • Automatic advance of fleece disabled.
  • Motor button will still function as manual advance.

Pressing the alarm button for > 5 seconds:- 

  • Full reset -  completely clearing alarm state
  • Disconnecting power: performs reset as above.
Normal Operation
Initialisation (Power on or reset):
• Blue/Red LED both flash for 5 times (audible alarm will sound with each flash)
• Blue LED will remain on.
Motor Advance:
Manual or automatic, Blue LED flashes
Possible Alarm Conditions:
Possible roll jam/motor failure (float held in up position for more than 5 seconds)
• Red alarm LED will flash
• Audible alarm will sound for 2 seconds every 5 seconds
 Automatic advance of fleece disabled.
Possible fleece empty (float not triggered within 8 hours)
• Blue/Red LED both flashing, audible alarm will sound for 1 second every 2 seconds
• Automatic advance of fleece disabled.
Possible installation error (float not triggered with 48 hours)
• Red LED will flash at 10 second intervals (audible alarm will sound with each flash)
• Automatic advance of fleece disabled.



Installation advice, tips and troubleshooting


For the Quick Start Guide and dimensional drawings please download the files below.








ClariSea Unboxing


Clarisea Assembly Instructions


ClariSea Changing the fleece roll


Vi använder cookies för att säkerställa att vi ger dig den bästa upplevelsen i vår webbshop.